repipe Information - AMA Repiping LLC
Polybutylene Atlanta
Polybutylene Atlanta
The advantages of using he services of AMA Repiping LLC in Atlanta are:
- we are local to Atlanta metro area; we do service in other parts of Georgia too; we are a nationwide company but we have a local office with local talent
- specialization in repipe; we do not do other plumbing services and we do not compete with the local plumbing companies; we do one thing – repipe
- we do free estimates on all our projects and requests for inspection of polybutylene piping
- we give 25 year transferable warranty on our materials and work
- we offer a true turn-key solution; we do the estimate; we plan the work we leave a fully usable and finished house with no need for additional vendors to finish drywall, paint or to clean
- we give 100% satisfaction guarantee
- we do quick turnaround service; we are usually done in an average size house in about 3 to 5 days
- when AMA Repiping does a project there is no need to vacate the property; we isolate the sections of the house for us to work and progress through the project so the family can continue occupying the house and not need to pay for hotel or disrupt their daily life
- we accent strongly on finishing work; during the actual replacement of old pipes with new some wall will need to be penetrated and some drywall removed; we will recover those walls and finish and paint to leave them as new
- AMA Repiping has a very thorough, specific Quality Control (QA) process; through the progression of our projects we have specifically designated check and QA points that are inspected with great attention to detail
Polybutylene Pipe Replacement Cost
Polybutylene Pipe Replacement Cost
The price of replacing existing polybutylene piping in a house depends on a few factors:
- Size of the house and more specifically the size and complexity of the actual plumbing – all pipes going from the supply line (utility water intake) to all the different water appliances: faucets, showers, washer and drier closets, bathrooms, hot water tubs etc.
- The complexity of the walls behind which the current pipes are; not all current pipes get actually replaced many of the current pipes can simply be disconnected and then bypassed with the new plumbing (from a longer lasting material than polybutylene); this a great way to reduce repipe cost in many situations.
- The new piping material used. Some modern options are copper, PEX, PVC (or CPVC).
AMA Repiping can do a free estimate for your polybutylene repipe project. So Call us!
Polybutylene Repipe
What are the dangers of polybutylene piping?
The trouble with polybutylene, apart from the fact that it’s in millions of older American homes, is that some of the additives in the public water supply can damage your poly pipes from the inside out. And you won’t know you have a problem until water starts leaking.
If the leak is inside your drywall, you’ve got a major problem on your hands because it may not be immediately apparent. As the water seeps out of the fractured pipe into the house, the damage bill can go through the roof.
If the leakage starts under the floor of an upstairs level, well, the whole of your lower level may become waterlogged. Or even flooded over time if, for example, the leak develops while you’re away on holidays.
Often it’s the plastic fittings that go first, or the point where the piping joins the fittings or at sharp bends in the piping. Those bends create mechanical stress on the pipe and it’s believed that adds to the rate of deterioration.
What happens is this: municipal water contains antioxidants (including chlorine and chloramine compounds) that wear away at the inner surface of the pipes. It happens every time the water is turned on.
“What’s gray and black and blue all over?”
Sounds like the opening line for a joke, doesn’t it?
But no, this is no joking matter. Those are the colors of the poly piping that was installed in millions of homes and commercial buildings back when it was legal to do so. Gray was used inside. Blue was the main color used outside.
You can take a look at your pipes, and on the surface they look okay. There is no visible sign of an impending leak.
But what is happening out of sight, inside the polybutylene piping, is that the oxidants in tap water are making the poly fragile. Flaking or scaling may be taking place. After the inner surface of the pipe is first fractured, the rate of degeneration increases.
Worried? There’s an easy way to get peace of mind
Now, poly pipe was not used in every home built between the late 1970s and middle of the 90s, but unless you know for a fact that your home has no poly piping, it would be in your best interest to get it checked by experts. AMA Repiping will come and examine your home or business at no cost and with no obligation.
Give ua a call and secure your peace of mind.
The low-stress way to replace polybutylene pipes
If our experts determine that you have polybutylene pipes in your home, they can give you a fixed price (and a fixed time frame) for the remediation work.
And don’t worry. It’s not as disruptive as you’re probably thinking it will be. Read the testimonials here on our site and you’ll see how relieved (in fact, delighted) our clients have been with our workmanship.
Our polybutylene repipe services are second to none. It’s the only thing we do – and we’re really good at it.